Monel 400 Plate
Monel 400 Sheet | Sheet 400 | Plate Monel 400 | Sheet Monel | Supplier of Monel 400 Plate | Nickel Alloy Corporation | Monel 400 Sheet Dealer
Supplier and dealer of Monel 400 sheets with outstanding performance
Monel 400 is used to make Monel 400 plates. With a high concentration of nickel and copper and a low concentration of iron, manganese, carbon, and silicon, this 400 monel alloy is a nickel-copper alloy. Nickel Alloy Corporation is among the leading suppliers of Monel 400 sheets. We assure you that our Monel sheet and every other product will persistently display outstanding integrity and provide exceptional productivity.
Which sectors do we represent as the premier supplier and distributor of Monel 400 plates?
We are a recognized distributor and supplier of Inconel 800 Ring bars in the following key sectors:
- The chemical sector
In the chemical and petrochemical sectors, Nickel Alloy Corporation is a well-known vendor of Monel 400 plate. Because of these sheets’ exceptional endurance against chemicals that corrode. They withstand severe acids and alkaline conditions. Therefore, our clientele of chemical businesses can have confidence in us.
- Marine organisations
Numerous clients in the shipping sector depend upon us as their source of Monel 400 plate. They trust us because we supply quality sheets that are renowned for their remarkable robustness, toughness against deterioration, and anti-biofouling characteristics even in the toughest submerged marine environments.
- Petroleum and gas businesses
The Monel 400 we sell is long-lasting and tensile-resistant; oil and gas businesses employ it in their wellhead equipment, packers, and downhole tool producing facilities. We have become an internationally recognised distributor of Monel 400 plates since they count on us even for the production plants of compressor components and sealing.
- Shipping companies
Our Monel 400 plate is vital for shipping procedures. Therefore, we maintain compliance with rules and regulations. This minimises the danger of upcoming shipping procedures and benefits businesses. Therefore, Nickel Alloy Corporation is also a dependable supplier of Monel 400 sheet.
Specifications of Monel 400 sheet
Nickel Alloy Corporation is a Monel400 plate supplier with sheets with the following specifications:
| Category | Details |
|---|---|
| Grade / Alloy | Monel 400 |
| UNS | N04400 |
| Werkstoff Nr. | 2.4360 / 2.4361 |
| Standards | ASTM B127, ASME SB127, EN, DIN, JIS |
Chemical Composition of Monel 400 plate
The Key aspects of the chemical composition of our Monel 400 plates are as follows:
| Element | Standard | Cast |
|---|---|---|
| Carbon (C) X100 | 30 max | 11 |
| Manganese (Mn) X100 | 200 max | 140 |
| Silicon (Si) X100 | 50 max | 14 |
| Sulfur (S) X100 | 24 max | 2 |
| Nickel (Ni) X100 | 6300 min | 6466 |
| Copper (Cu) X100 | 2800 – 3400 | 3232 |
| Iron (Fe) X100 | 250 max | 95 |
Physical Properties of Monel 400 plate
The physical properties of the Monel 400 sheet, which influence its strength and corrosion resistance, are as follows:
| Property | Value |
|---|---|
| Density | 8.80 g/cm³ |
| Melting Point | 1350 °C (2460 °F) |
| Electrical Resistivity | 344 nΩ·m |
| Thermal Conductivity | 21.8 W/m·K |
| Modulus of Elasticity | 179 GPa |
Mechanical Properties of Monel 400 plate
The mechanical properties of Monel 400 sheets, which make them durable, reliable, and effective across industries, are as follows:
| Property | Value |
|---|---|
| Tensile Strength | ≥ 550 MPa |
| Yield Strength (0.2% offset) | ≥ 240 MPa |
| Elongation | ≥ 30% |
| Hardness (Annealed) | ~65 HRB |
Equivalent Grades of Monel 400 plate
The equivalent grades of Monel 400 sheets are as follows:
| Standard | Grade |
|---|---|
| UNS | N04400 |
| EN | NiCu30Fe |
| AFNOR | NU-30M |
| GOST | МНЖМц 28-2,5-1,5 |
| JIS | NW 4400 |
| BS | NA 13 |
| Werkstoff Nr. | 2.4360 |
Sizes & Dimensions of Monel 400 plate
| Category | Range / Standard Sizes |
|---|---|
| Thickness (Cold Rolled) | 0.5 mm – 6 mm |
| Thickness (Hot Rolled) | 6 mm – 100 mm (up to 150 mm on request) |
| Width (Standard) | 1000 mm, 1250 mm, 1500 mm, 2000 mm (custom up to ~2500 mm) |
| Length (Standard) | 2000 mm, 2500 mm, 3000 mm, 6000 mm (cut-to-size available) |
| Coil Form (Sheets/Strips) | Thickness: 0.1 mm – 3 mm, Width: up to 1250 mm |
| Standards | ASTM B127, ASME SB127, EN/DIN equivalents |
| Finish | Hot Rolled (HR), Cold Rolled (CR), 2B, BA, No.1, Polished |
| Tolerances | As per ASTM / ISO (H9–H11) |
Why is Nickel Alloy Corporation able to maintain such high standards?
We are the top Monel 400 sheet supplier because we have the following dedicated personnel:
- Knowledgeable and skilled staff
Our team of professionals makes sure that every procedure is properly followed and that each phase of implementation finishes without any complications. We are the top supplier of Monel 400 plates as a result of our competent and seasoned team.
- Enthusiastic strategic leaders
Our leaders are resilient, creative thinkers, and decisive. They have made Nickel Alloy Corporation the leading dealer of Monel 400 plates by tackling challenges with determination and consistently inspiring and energising their staff.
- A Specialised Quality Control Unit
Our product testing for quality control is infallible. In addition to measuring and verifying parts and products, the team supervises, identifies, and eliminates defective products. On that team, there is also a quality head who oversees the entire procedure. Because of this, we are a superb dealer of Monel 400 sheets.
- Dependable Source for High-End Monel 400 Plates
We provide solutions to clients in a range of industries and possess outstanding knowledge of nickel alloys. We guarantee that the products we supply are of the very best standard and offer our clients our whole devotion. Because of our cordial relationships with numerous producers of Monel 400 sheets, we offer customisation solutions in conjunction with our broad spectrum of stock.
Contact us now in order to establish a fruitful partnership for business.